Our price list
Garage Door Price List for Mandurah
The figures we quote from across Mandurah and the Peel region, published in full. Every price includes GST, and the exact number is agreed with you before any work starts.
The short version
Garage door prices in Mandurah: a standard service call is $165, a broken spring is $450 to replace or $600 for a pair (service included), and a motor repair is usually $380–$490. A new opener supplied and fitted is $770–$990, and a new roller door $2,300–$5,000. All figures include GST and are guides we confirm on site before starting. After-hours and emergency call-outs add $500.
Standard service call
$165incl. GST
Built into a spring job
One spring is $450 and a pair $600, and the service is already inside both figures.
Charged once on a parts job
Rollers and hinges are $30 a part on top of a single $165 visit, however many we fit.
Booked by itself
The yearly service: tension, balance, lubrication and a safety-reverse test, on a day that suits you.
Repair prices
What we charge for the faults we fix most often. A spring job already has the service rolled into it.
| Job | Guide price |
|---|---|
| Broken spring (single)One torsion/extension spring supplied & fitted, service included. | $450 |
| Broken springs (×2)Two springs supplied & fitted, service included — best replaced as a matched pair. | $600 |
| Spring re-fit / re-tensionRefit or re-tension your existing springs (no new parts needed). | $280–$330 |
| Cable snapped or off the drumLift cable(s) replaced or re-seated and re-tensioned. | $280–$550 |
| Motor / opener not working (repair)Diagnose & repair the opener — gears, logic board, capacitor or limit switches. | $380–$490 |
| Door off track / stuckRe-rail the door, straighten/realign the tracks and replace damaged rollers. | $440–$770 |
| Door damaged (panel / section)Repair or replace a damaged panel/section and hardware. | $550–$1,100 |
| Hinges & rollers / wheelsWorn hinges/rollers replaced — $30 per part plus the $165 service call. | $30 each + $165 call-out |
| Roller door lock + armsReplace the roller-door lock and lock arms. | $380–$440 |
| Pelmet / hood replacedReplace the roller-door pelmet (hood). | $380–$480 |
| Weather seal (rubber & brush)Bottom rubber and/or brush seals supplied & fitted. | $280–$480 |
| Safety sensors / photo eyesReplace and realign the safety photo-eye sensors. | $150–$300 |
New doors and installation
Supplied, fitted and the old door taken away. A roller door starts below a sectional or tilt door.
| Job | Guide price |
|---|---|
| New roller door (supply & install)A new roller door supplied & installed, including removal of the old door, new tracks and hardware. | $2,300–$5,000 |
| New garage door — standard (supply & install)Sectional and tilt doors supplied & installed, including removal of the old door, new tracks and hardware. Roller doors are priced on the row above. | $3,000–$5,000 |
| New door — commercial / customCommercial and custom doors — supplied & installed. Priced to your opening and specs. | From $5,000 |
| Tilt-door arms kit + springsTilt-door conversion/replacement arms kit with springs. | $1,200–$1,800 |
| Roller door removal & reinstallRemove and reinstall your roller door (e.g. for rendering or building works). | $880–$1,500 |
| Sectional door removal & reinstallRemove and reinstall your sectional door. | $990–$1,300 |
| Commercial roller door (service, from)Commercial roller door service/repair. | $280–$380 |
Motors, remotes and smart control
Openers fixed or swapped, extra remotes coded to your motor, and phone control added where the opener supports it.
| Job | Guide price |
|---|---|
| Motor / opener replacementNew opener supplied, installed and programmed — including remotes. | $770–$990 |
| WiFi / smart control (supply & install)Add WiFi/smart control to a compatible opener. | $280–$380 |
| Remote (extra / replacement)Remotes are $95 each, plus the $165 service call to attend and program them to your motor. | $95 each + $165 to attend & program |
Servicing
The lowest figure on the list. If the service turns up a worn part, you hear the price before it goes on — nothing is added unless you agree to it.
| Job | Guide price |
|---|---|
| Service / tune-upFull service, safety check and adjustment — a flat $165 including GST. | $165 |
Guide prices from our own list, not a fixed quote. The exact figure depends on the part, the size of the door and how easy it is to get to, and we agree it with you before any work begins.
After-hours and emergency jobs add a flat $500
When the door cannot wait for a normal booking — a car shut in the garage, a door stuck open overnight, a spring that has let go — we still come out after hours. That visit costs the usual job price plus one $500 surcharge, and we tell you it applies before we leave, so you can choose the next ordinary slot instead.
What moves each price
The list gives the figure. These guides go job by job through what pushes a price to either end of its range, and when a repair stops being worth paying for.
Price questions we get asked
$450 for one spring and $600 for a matched pair, supplied and fitted. Both figures already include the $165 service, so nothing is added for the visit. When one spring on a two-spring door snaps, its partner has done exactly the same number of cycles, which is why we usually suggest doing both while we are there. Doors that run three or more springs are priced once we have seen them, because the door's weight sets the spring size.
A complete service of the door: spring tension and balance checked and set, rollers, hinges and track cleaned and lubricated, cables and fixings inspected, the opener's travel and force adjusted, and the safety-reverse tested. On a parts job the same $165 is the one attendance charge, with each roller, hinge or remote added as a part. If we find something else that needs doing, you get the price first and decide.
A roller door supplied and installed is usually $2,300–$5,000. A sectional or tilt door sits around $3,000–$5,000. Both include taking the old door away and new tracks and hardware. Wide, commercial and made-to-order doors start at $5,000 and are always measured first. Door size, profile, colour, insulation and whether you want a motor fitted at the same time are what move the number.
Yes. Every figure on this page is the price you pay including GST, from the $165 service call up to a new door. We do not list an ex-GST number anywhere, so there is no 10% to add at the end.
A flat $500 on top of the normal job price. It is added once, not multiplied, so a $450 single-spring job done after hours comes to $950. You are told whether the surcharge applies before anyone sets off, so you can choose to wait for a normal booking instead.
A single figure means the work is the same on every door — the service call, springs and remotes are like that. A range means the job itself varies: one cable or both, a dented section patched or replaced, a narrow opening or a wide one. We publish the range rather than quote everybody the top of it, and we confirm where your door sits once we have looked at it.
It is the price we work from, and in most cases it is where the job lands. Because the exact figure depends on the part, the door and how easy it is to reach, we confirm it with you on site before we start. Once you have agreed a figure, it does not change during the job.
Get the exact figure for your door
Prefer to call? 0476 156 953Ready to upgrade your
garage door experience?
Whether it's an emergency repair in Mandurah right now or a quote for a new door anywhere in Mandurah, we've made getting help faster and easier than ever.
