Skip to main content
Mandurah Garage Door Repairs

Pricing Overview

What a New Garage Door Costs in Mandurah, Fitted

Roller, sectional and tilt doors priced supplied and installed, with the old door taken away — and the choices that move the figure most.

Quick Answer

Garage door installation cost in Mandurah starts with the door type: $2,300–$5,000 buys a new roller door fitted, and $3,000–$5,000 a sectional or tilt one. Removing the old door, new tracks and hardware are part of both. Wide, commercial and made-to-order doors start $5,000. Figures include GST and are confirmed once we have measured the opening.

New door prices, supplied and installed

These are the figures we quote from for a new door around Mandurah and the Peel region. Each one covers the door, the fitting and taking the old door away; a motor is an extra you can add on the same visit. The complete price list has every other job we do.

Repair TypeTypical RangeBest Next Step
New roller door (supply & install)$2,300–$5,000
New garage door — standard (supply & install)$3,000–$5,000
New door — commercial / custom$5,000–$15,000
Tilt-door arms kit + springs$1,200–$1,800
Roller door removal & reinstall$880–$1,500
Sectional door removal & reinstall$990–$1,300
Motor / opener replacement$770–$990
WiFi / smart control (supply & install)$280–$380

Ranges cover typical house openings around Mandurah. Boat, caravan and high-clearance doors are measured on site, and the roller door vs sectional door comparison helps if you have not picked a type yet.

What decides where your new door lands

Roller, sectional or tilt

A roller door is the lighter build and starts lowest. A sectional door uses more hardware and suits wide, low-headroom openings; a tilt door swings out as one leaf and sits in the same band.

Width and height of the opening

A single-car opening and a double are different doors before any options are chosen. Taller openings for a boat, caravan or trailer need bigger panels and heavier springs, which is why we measure first.

Profile, colour and finish

Standard colours cost less than timber-look or special-order finishes. The garage doors we supply come in several profiles, and the one you choose shows up in the price more than people expect.

Insulation

An insulated door costs more than a single-skin one but keeps a garage used as a workshop or gym noticeably cooler through a Peel summer.

Salt off the estuary and the ocean

On canal and beachfront blocks, better-finished hardware and fixings hold up longer against salt. It can add a little to the install and saves on early rust repairs later.

Whether a motor goes on at the same time

Fitting the opener while the door is going in avoids a second visit. Our motor replacement cost guide covers the opener side in detail.

Four new-door jobs and how they usually price

Swapping a worn single roller door on an older home

Common in central Mandurah, Coodanup, Greenfields and Falcon. A like-for-like roller door usually sits in the $2,300–$5,000 band, with colour and width deciding where.

Upgrading a double door on a newer estate

Homes in Lakelands, Madora Bay, Meadow Springs and Wannanup mostly run sectional doors already. Replacing one lands in $3,000–$5,000 depending on profile and insulation.

A high door for a boat or caravan

Extra height and width move this into the made-to-order range, from $5,000. We measure the opening and the headroom before naming a figure.

A tilt door that still has a sound leaf

When the leaf is fine but the arms and springs are tired, renewing them for $1,200–$1,800 can be the cheaper path. If the tilt door itself is rusted or bent, a new door makes more sense.

Replace the door, or keep fixing it?

A sound door with one failed part is cheaper to repair, and the garage door repair cost guide shows those figures. A new door earns its price when the door itself is the problem.

Repair is usually better when

  • Panels or curtain still straight, with no rust coming through
  • Only a spring, cable, roller or opener has failed
  • You are happy with how the door looks and runs
  • Parts for that make are still easy to buy

Replacement may be better when

  • Panels are dented, rusted through or coming apart
  • Repairs keep coming back on the same door
  • You want insulation, a quieter door or a new look
  • The opening is changing size during a renovation

How a new door gets priced

01

Tell us about the opening

Rough width and height, the door you have now and the type you are leaning towards is enough to give you a starting range.

02

We measure on site

Width, height, headroom and side room are checked, because those decide which doors fit and how they are mounted.

03

You choose the door

We go through roller, sectional and tilt options from the makers we supply, such as Steel-Line, B&D and Centurion Garage Doors. The figure is fixed before the door is ordered.

04

Old door out, new door in

We remove and take away the old door, fit the new one with its tracks and hardware, then balance and test it before we leave.

Frequently Asked Questions

Roller doors are the entry point at $2,300–$5,000. Sectional and tilt doors cost $3,000–$5,000, while made-to-order and commercial doors begin at $5,000. Removal of the old door is in each figure, and GST is included.

Rather talk? 0476 156 953

Owner-operator with 15 years in the trade

Ready to upgrade your garage door experience?

Whether it's an emergency repair in Mandurah right now or a quote for a new door anywhere in Mandurah, we've made getting help faster and easier than ever.

Mandurah Garage Door Repairs logo

Garage door repairs and servicing

mandurahgaragedoorrepairs.com.au